I love the attention to detail, it is very satisfying to watch how clean these vehicles get. Awesome work!

Okay let me just say this..the editing on this video is 🔥🔥🔥🔥🔥👍 the transitions,music and everything!!!

Damn those rigs are clean! Love your attention to details. Clean trucks keep you moving through inspection stations for sure.

This was awesome. Thanks for taking the time. I struggle with cleaning my truck with the #1 issue being time. Sad to say my truck has had only 1 wash since September 2020. So oxidation is an issue. It's a company truck but I try to care for it like it's my own. I'll be shopping your site for sure.

That stuff looks like it did a great job on that truck. Do you have to dry it to use m shine? Or can you spray it on before. Can you pressure wash the truck first to get all the heavy dirt off then use the touch free stuff or does it need to be dry when you apply it. Nice job anyway I drove mixers for years we had to use acid to get the concrete and cement off of the truck and it ate the aluminum wheels and chrome etc.

Tip on starting your blower. I used to struggle like that too. Then someone told me to do it like this: Put throttle all the way 100% rabbit Set choke on Prime a couple times on the bulb Pull starter rope. It will start in one or two pulls, then turn off choke and adjust your throttle. This changed my life.

awesome video Bob! keep them coming Next one should be complete video of the wash bay and another one of a full chassis degreasing job on a dump truck

I’ve tried other products but this is the best I’ve ever used I wash every day and this has been a time killer for me

damn good video! haven't checked out other videos yet as this is the first one I've seen, but you should definitely do more big rig videos like this!! Subbed!

Looks great Bob !! I'm not surprised. Great products 💪👊👍

Nice vid,Bob. I was hoping though,that you would've tried a section of the body or one wheel with touchless Mshine. Impressive how it removed the salt stains. Very few products can do that without destroying the shine

Amazing work man, keep it up! Results will folllow.

OK! You've got me! Subscribed . Have you ever tried to not use the foam cannon and instead use a compressor to apply (using a shutz gun i believe). I've used a foam canon, but wasn't as good as the compressor. Let me know your findings. Cheers.

Great to see the wash bay done. i just got done hooking my system up i got from keith.. stuff works great dont have to brush wash my truck any longer. very happy with the system i got

I gotta say, touchless wash soaps like this one (ive used this brand and wash chem) make life awesome, not just almost perfect wash with no touching (besides towell drying, i havent upgraded to a blower yet) but also getting in the areas like wheel wells and frames and other nooks and crannys that you normally wouldnt get too on a quick basic wash, and just makes the vehicle look that much better when all those areas get cleaned up vs hand washes where you dont get paid enough or have enough time to take the time and scrub it with a detail brush to clean it all up. These products are just awesome, also i like the chem x more than wash chem, just that much more efficient and better clean, just ordered my first supply of snake oil and so excited to try that out!

This showed up in my recommended feed, glad I clicked on it, very nice I hope your channel grows big some day

You got an awesome detail shop to clean big rigs and I definitely know it’s a chore on getting those rigs cleaned

Love the final detail spray going to have to get me some of that

Love the products. Got a giggle when you said you going to treat it like it was yours. I seem to remember a video of you cleaning the inside of your van.

He better get that hub seal fixed, MA DOT would love to write him a ticket for that one! Good job on the detail, looks sick.

Taking pride in your work, A lost art! Thank You for sharing! Excellent Job!!

Great job showing the difference between soap and no soap HUGE difference

I can not believe I missed this one.. 🤔 That was flipping sick man!! I cant wait for more 🤘🏻

What's the target market for this truck wash bay? I wouldn't have thought many truck companies would want to lose a vehicle for 48 hours to have it look this good? The quantities of the various sprays you used seems a lot, is there a reason you use so much? That truck looked awesome at the end! The difference between using pre-rinse and not using it surprised me I have to say. Enjoyed this video, good luck with the new bay!

That is one nice peterbilt, lovely colour! Great detail

This is pretty awesome you dont see very many young guys with a passion any more thanks have a great day be safe.

Great following the journey with you.....but you is havin waaaay too much fun!!! Hope it all continues the way you want it and pre-wash is for losers 😎😎

I see this truck on the road all the time! Nice work

I operate a 100ft landing craft with a mantis 18 ton crane on the bow. 2 months out of year it's in a salt water environment. What would you recommend for repelling salt water spray and corrosion? Something I can apply before heading out the locks into salt water.

Nice truck and you should put out more video like this one!

Stars and Stripes is awesome!! I get compliments on my truck everyday, and I just say Chemx

The polishing towel is the Eagle Edgeless from The Rag Company. They come in 350 and 500 gsm, I believe. 👍✌

What is the overall length of your wash bay ?

What pressure and gpm do you recommend for pressure washer using stars and stripes

I just found your channel am a big fan of seeing big rig get details your just earn a sub my friend love your content

Your videos are the bomb! All good to use of RV’s? Also any type of spray on/rinse “wax”? Thank you

Good stuff man. Wish I could get my car hauler out there.

Nice vid man. Couple of suggestions if you ever see this comment....voice overs on certain areas where camera talk isn't necessarily needed. And clay bar for the windows/windshield 👍

First time watching you, and gotta say beautiful work! Liked & subscribed!

This channel deserves more subs, great film and editing👍👍👍

Oh love the videos never knew the company was in mass even more I would love to try the products

Overall really good video. Get the audio normalized and you’ll have some really solid material.

Awesome job !

I feel like you're my twin brother. Love the washbay.

Dude , your video editing alone is worth watching for , such a professional job. The cleaning is off the charts , and you’re a dry humour riot. You look and sound like a hybrid of Tom Petty , Dwight Yoakum , and some other guy I can’t remember the name. lol.

First time watching your video content from a drivers point thats a brand new rig after your finished. For sure slammed the Like button and Subscribed. Clean on my Friend Clean on.

Great job and nice shop !

is m shine safe on rubber ? can you foam it onto alumin rims and wheels

Just subscribed. That truck looks wicked!

Awesome wash bay

Looks like a perfect solution for a truck that isn't really dirty. I may have to try it out. It won't hurt my polished aluminum?

Knew I recognized this truck. I see crestview all over the place always some sweet looking rigs

Looks awesome.😲

Do it on a Artic from the UK they’re always a mess 😂

Might just have to send you some pictures of my truck. This salt season was not kind in the least 😂😂. Killer vids as always

Good job keep it up, God bless

A no touch system is fine for a quick wash but if you take a truck you no touch washed to a big show (truckers jamboree, shell super rigs, Louisville, etc) your going to get docked huge in the points, truck shined up good for a hour wash but the steps/visor/ bumper/diamond tread needs cut, the tanks especially the fuel caps and surrounding area needs hit, and he better get that wheel seal fix at the very least it’s gonna junk that durabrite but the dot will have fun with it to.

What chemical goes into cleaning the floor afterwards

That passenger front wheel hub needs an oil cap/gasket 👀😂

Definitely a difference!!

You seem like a down to earth kinda guy. I like that! I like the video. First one I’ve seen of yours. Got a sub from me!

Those must have a high ph level to clean like that.

I never knew Mr. Beast was a detailer 😆☺️😊😅

cool stuff bud im definitely lookin into

Damn good job 👍🏼

You should try a brush attachment on the vacume

That shop vac seemed a little week! I want one that will suck the color out of the carpet!!!

This is the 1st video of yours I’ve ever seen. Got to the @8:52 mark and immediately subbed!

Damn, that came out nice!

That thing isn't that dirty. At all. In fact, I'd say it's "knock the dust off" It's 100% polished aluminum which is easy to clean. Even looking at the frame before, it's pretty clean.

Need to buy some of your products and give my ram truck a good wash. Central New York winters take a toll on my truck. road salt and sand everywhere on this truck.

damn that truck is shining

Can you use M shine just by itself with the mop head on paint and aluminum

Please get a STHIL blower! U never regret it

That is one sick shop ✅

You know you have spoiled company drivers when they can't even shake out the floor mat.

That truck isn't even that bad😂

now this is how a truck should be cleaned every time !! at a minimum once a week while keeping up with it during the week...and i don't want hear hear that you dont have the time you are to busy working... FYI thats just another way of saying you are a lazy sack of shit that could care less about the truck because its not yours... [aka ass in a seat] love this product !!!!

Mr. Chem-X do you have any idea on what type of water gallon tank I should get for hot water pressure washing for a mobile setup. Say for example if I was washing 3-5 trucks a day

You give me Bob’s Burgers vibes and I strangely like it!😩😂